-
### The problem
After uprading to any version of 2024.8.x I have the following 4 issues:
1) All zigbee devices are offline after the update. Slowly the Philips lights and SONOFF switches will c…
-
### The problem
Since I found that the old version of FP2 is unable to connect to Home Assistant ```Unknown Error Occur```, I upgraded the firmware of FP2 to 1.2.7_0010.0080. After I upgraded the fir…
-
Написал статью, где по полочкам разложил прошивку и добавление интеграции. https://dzen.ru/a/Zg5nNBHnsk6exK_f
-
### What happened?
When checking for an Aqara FP1 [Lumi.motion.ac01] firmware update, the message states: Firmware on '0x54ef441000589610' (lumi.motion.ac01) is newer than the latest firmware online.…
-
### Link
https://www.aqara.com/controller_overview
### Database entry
{"id":13,"type":"Router","ieeeAddr":"0x54ef44100092e5e2","nwkAddr":14162,"manufId":4447,"manufName":"Aqara","powerSource":"DC S…
-
### What happened?
Hello,
since a while, I notice an insane update rate from one of my [Aqara WSDCGQ11LM](https://www.zigbee2mqtt.io/devices/WSDCGQ11LM.html).
I get several hundred updates in a…
-
Hey,
my new camera "Aqara Hub G2" will not work :(
```
root@raspberrypi:~# videop2proxy --ip 192.168.86.6 --token TOKENXXXXXX --rtsp 8554
Starting proxy...
Starting RTSP server on "rtsp://192…
-
### The problem
hi every time i restart home assistant it loses contact with this remote control.so then i have to pair it again and then it works again until i restart..you can excuse me if there …
-
### The problem
The video quality via HomeKit integration into HomeAssitant is very low quality, with artifacts and not always in live mode (the picture may not be updated for a long time). There is …
-
### Bug description
Recently new support for Aqara WS-EUK04 in ZHA was added by @TheJulianJES. much appreciated btw!
Using ZHA on Core 2024.1.3 , Supervisor: 2023.12.0, Operating System: 11.4, Fro…