-
I have a problem: Is it true that the first time it starts, the DCDC1 voltage will be 3.3 Vdc according to section 7.6 of the datasheet I attached? How will the starting order of the voltages be confi…
-
It is not clear to me how the device can sustain 24.7 (i.e. continuous) working conditions using the batter and a solar panel.
If I understand correctly the behavior of the PMU if we enter the cond…
-
![20240122_205429](https://github.com/meshtastic/firmware/assets/156138752/bf015ef2-3871-429b-9f3a-ea17016bac0e)
### Category
Hardware Compatibility
### Hardware
T-Beam
### Firmware Ver…
-
Can you help me to integrate the board 1.2 with axp2101
https://github.com/kizniche/ttgo-tbeam-ttn-tracker
-
Hello,
The new Lilygo T-Beam boards are coming with a new power management chip. In place of the AXP192 is now coming the AXP2101.
This is causing the APRS LoRA Tracker to malfunction.
![image](…
-
I uploaded in the LILYGO T_BEAM433 MHz.
The version of the board is a mystery:
- the white label say '2ASYE-T-BEAM MODEL V1.1'
- the text on PCB close to the antenna say 'AXP2101-V1.2'
On the disp…
-
hi. his this camara a paper weight?
[125]HELLO! BOOT0 is starting Nov 14 2019 20:01:31!
[130]BOOT0 commit : 81c18ee
[133]board init start
[135]set pll start
[138]set pll end
[139][pmu]: bus re…
-
All
using a LILYgo T3 V1.6.1 using it for a iGate.
No matter what frequencies and mode I use its the same error Error stationMode Not valid.
Thanks
Andrew
config below...
{
"callsign"…
-
[AXP2101.pdf](https://github.com/lewisxhe/XPowersLib/files/12512115/AXP2101.pdf)
Is it true that the first time it starts, the DCDC1 voltage will be 3.3 Vdc according to section 7.6 of the datasheet …
-
Hello
Unfortunately, this code will not work on newer T-Beam boards sold by Lilygo (official Aliexpress store)
Since June 2023, AXP192 are no longer produced (or sold ?). New Lilygo T-beam boards …