-
### Description
I am trying to install this board (BIGTREETECH SKR Mini E3 V2.0) with BIGTREETECH Direct BTT TFT43 V3.0 Display Screen on my ender 3 v2.
This is my configuration files.
when t…
-
Is the CB+ Compatible with Raspberry-Pad (https://github.com/bigtreetech/Raspberry-Pad).
How Install the driver corretly?
-
i have mks-35 an its connect to a bigtreetech skr1.3 through aux_1 but it heat the bed and hotend but stops sits there an dos not print i have checked baud rate i can print through the sd card on the …
-
I cannot customize the firmware for my printer, because the "Configuration.h" and "Configuration_adv.h" files are not provided in the repository.
Describe the solution you'd like
Please provide th…
-
Dear Bigtreetech. Please make a working firmware for S42C and post the sources on Github... At the moment this shit does not want to work at all, it does not pass calibration and does not work with th…
-
The change of the Panda image works great in FW1.03 but can we have the same for the Main Screen Logo. BIGTREETECH is already engraved at the bottom of the screen, I'd like to be able to put my own lo…
-
If anyone is interested in some different icons. I created some: https://github.com/DynaMight1124/Bigtreetech-TFT35-Icons
-
Upgrade the CB1 image to Debian 12 Bookwoom to allow use of /dev/serial/by-id/
-
How do I start the screen 3.5 inch rpi lcd on the BIGTREETECH PI4B Adapter V1.0 and CB1 ?
-
The ERB board fails to connect to the host at boot until the reset button is pressed and the klipper service is re-started. This appears to be the same issue mentioned in the BTT SKR-Pico issue named …