-
What am I doing wrong? I've installed, uninstalled, and reinstalled and still no luck.
ewx[4017] CRITICAL __main__: Caught unrecoverable exception:
weewx[4017] CRITICAL __main__: **** module …
-
I connected a bme280 thermometer to the Pi zero, but Wenet now gives an error, and it doesn't work. I tried removing the thermometer, formatting the SD card, but I can't solve the problem. Suggestions…
-
A handful of times per day some sensors (mostly humidity, occasionally temperature) report 'nan' values over mqtt. Happens mostly with the commons ground and ceiling sensor clusters and sometimes with…
-
For the very first reading I'm getting values of humidity and pressure very different from the successive readings.
For example, with this code:
```
BME280 bme280 = new BME280(BoardDefaults.getI2…
-
-
Dear Robert,
first things first: Thanks for conceiving and maintaining this MicroPython library for the BME280. We have been using it successfully within the [Terkin-Datalogger](https://github.com/…
amotl updated
4 years ago
-
Dear team,
I'm realy new in github and IoT, please help me whith this issue.
DHT22 and BME280 has diference in measured values.
You can found me here or in telegram @Krasi_Garchev
Sensor Para…
-
### The problem
Address 0x77 should be 0x76
### Which version of ESPHome has the issue?
2022.3.1
### What type of installation are you using?
Docker
### Which version of Home Assistant has the …
-
The following for loop is supposed to output the calibration coefficients raw dump, which would be 66 bits. However, it is actually dumping out 72 characters for unknown reasons. We need to fix this s…
-
Just found this multisensor board, would be nice to implement it into software.