-
## Describe the Bug
```
*** QMK Toolbox (http://qmk.fm/toolbox)
Supporting following bootloaders:
- DFU (Atmel, LUFA) via dfu-programmer (http://dfu-programmer.github.io/)
…
-
Dear all,
Following the discussion in issue #173 , I have thought that perhaps it could be relevant to create subtypes of Non-specific syndromic intellectual disability [ORPHA:528084](https://www.…
-
Is it possible to use xboot on ATmega32u4?
-
### Describe the bug
qmk requires several tools for compiling. These should be added as a dependency:
```[I] moritz@moxps ~/P/qmk_firmware (master) [SIGINT]> qmk setup
Ψ Found qmk_firmware at /…
-
# PCB
- modify edges of button so when being routed on mfr. it doesnt come out round
- add fiducials for alignment
usb doesnt sit well because of lip
- ADD PIN1 MARKER TO Q1 SO8
- crystal needs to b…
-
Hi!
I'm unable to get anything out of ATmega32u4.
I can flash it but when i do make monitor i cant get no response.
Pressing any key on keyboard makes led flash but otherwise i get no response in t…
-
The documentation links referenced [here](https://github.com/bioimage-io/bioimage.io/blob/7d8a8b3686b4aaef56a4688635557b2824281149/docs/guides/community-partners-guide.md?plain=1#L171) do not exist.
…
-
Hi
Nice work with the makefile for arduino!
If using the Arduino-Makefile with the above mentioned IDE plus adding an extra board using the "board admin" GUI, the makefile does not set correct includ…
-
Dear all,
could you please consider to add to the database. A rare disease centre in Germany is requesting this entity for a coding issue. Please find relevant publication below:
PMID: 2571726…
-
It seems that the bootloader doesn't clears the USB interrupts after programming.
So, the program hangs just after enabling global interrupts.
It works after reseting or power cycling the board.
It …