-
The ESP-Modem Component is not supported.
It would enable SMS+GSM +LTE connections to work with the current Netif interface.
I have started calling into the the [esp-modem](https://docs.espress…
-
## Context
This question is a mix of modelling and route behavior. I'll start with a description of the 7-series rrgraph import behavior around "site pin delays", and then describe the observed ef…
-
I am following the instructions listed here to run this job:
https://docs.gitlab.com/ee/user/project/code_intelligence.html
go get works fine but running the binary runs into problems because it l…
-
also discussed in:
#156
#168
#179
-
Hi,
I'd like to use the new PPP-level integration on Linux with a LARA-R6 cellular module connected via USB but ran into two issues so far:
1. I had to comment out lines 979 and 980 in u_cell_pw…
-
ccl/backupccl.TestRestoreAsOfSystemTimeGCBounds [failed](https://tanzanite.cluster.engflow.com/invocations/default/14414bb1-cd90-4e9f-9a89-6326325dab9a?testReportRun=2&testReportShard=4&testReportAtte…
-
```
pi@raspberrypi ~/gsm_lab/external2/python-gsmmodem/examples $ sudo python sms_handler_demo.py
```
```
Initializing modem...
INFO: Connecting to modem on port /dev/ttyAMA0 at 19200bps
DEBUG: write…
-
### Board
ESP32 S3
### Device Description
ESP32 S3 DevKitC
### Hardware Configuration
ESP32 connected to SIM7600E (BK-SIM7600E board) using only RX and TX, without RST pin.
### Version
v3.0.4
…
-
## Bug Report
etcd goes into a boot loop after upgrade from Talos 1.8.1->1.8.3. Node/Cluster never becomes ready.
### Description
```
talosctl -n n1 service etcd …
-
Hi,
I've been looking into getting the MGA-based offline/online assistnow data to the LENA-R8 through the ubxlib. So far no luck.
As far as I understand:
- In `uGnssAdd`, we check if `pInstance…