-
Follow the tutorial to configure the development environment, but in the end, cargo build still failed to compile
```
Using managed esp-idf repository: RemoteSdk { repo_url: None, git_ref: Tag("…
-
@username-AL I did not know what is the other way to contact you, so I created issue.
I am trying to pari ESP32-C6-DevKitC-1-N8 to Hubitat. But it is not pairing at all.
Following is output on the …
-
### Describe the bug
I have a **configuration with multiple SSIDs (3) on one wireless radio**, everything works fine on 80Mhz.
When I change from 80Mhz to 160Mhz all those wireless SSIDs on 5GHZ…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the documentation [ESP Zigbee SDK Programming Guide](https://docs.espressif.com/projects/esp-zigbee-sdk) and tried the [debugging tips](https://docs.espress…
nomis updated
3 months ago
-
Hi
If both enable QAT_HW and QAT_SW, can it switch to SW when HW bandwidth resources is busy, and switch back to SW when HW resources is free again?
From https://github.com/intel/QAT_Engine/bl…
-
Bluetooth audio sometimes drops out for about a second. This problem increases when using wifi (e.g. downloading or streaming).
If wifi is disabled bluetooth audio is stable.
Kernel: 4.14.0-rc3-au…
-
Feature request and heads-up; Silicon Labs is phasing out EFR32MG1x + older HW not included in newer Simplicity SDK versions:
EZSP protocol version incremented to EZSP v14 in Zigbee EmberZNet v8.0.…
Hedda updated
1 month ago
-
**Describe the bug**
For a WiFi router/repeater I use a Raspberry Pi 4B and created an access point with an uplink client connection to the local internet router using a virtual interface of type `__…
-
Mediatek mt76x8, openwrt build, mipsel-openwrt-linux-, kernel ver 4.14.41
ifconfig -a does not list the device.
root@OpenWrt:/# lsmod | grep 8812
cfg80211 212580 5 mt76x2e,mt7603e…