-
Hello,
**Platform**: Ubuntu 20.04 for arm64 (Graviton3)
**Guest Image**: ubuntu 20.04 for arm64
tcpdump returns the following error:
`tcpdump: lo: SIOCETHTOOL(ETHTOOL_GET_TS_INFO) ioctl fai…
-
I am using a repurposed particle xenon board with circuitpython with a particle ethernet featherwing. I have the [same issue as this ](https://github.com/adafruit/Adafruit_CircuitPython_Wiznet5k/issue…
-
- [x] **I have researched the list of existing Companion modules and requests and have determined this has not yet been requested**
The name of the device, hardware, or software you would like to c…
-
### Describe the bug
mount emmc or mkfs on emmc is not possible, much I/O ERROR in dmesg
```
root@ImmortalWrt:~# dmesg
[ 0.000000] Linux version 6.6.59 (buildbot@buildbot.infra.immortalwrt.org)…
-
### What happened?
I have tag `Mod1.FDPRT.PAP2.Axis[3].Drive.NcToPlc.ActTorque`
`"Axis[3]"` its not an array, its name of plc tag, so i expext that everything works okay, but seems like it is not pa…
-
I'm trying to get data from a simple temperature sensor over the network via modbus. The device is accessible via the provided windows software, but doing it with modbus-cli would be much nicer.
Th…
-
### What happened?
Content:
I have encountered an issue while using the plc4j-driver-bacnet (version 0.12.0). Upon creating a connection, I received the following error message: "Active connections …
-
**The name of the device, hardware, or software you would like to control:**
Online Software : Challonge. Challonge is made to facilitate online or physical tournaments. > https://challonge.com/
…
-
Unable to import Cisco IOU L3 version 17.15.1 and Cisco IOU L2 version 17.15.1
The error reads as file was not found. However, the image upload was successful and is listed in the /opt/gns3/images/IO…
-
Now that the OSS project is dead, it would be nice to put back in to this at least the JK CAN protocol(s) that the new bms boards support so that we could connect this wired, and then output CAN to in…