-
### Description of the bug
Uprgraded octoprint from 1.10.0 to 1.10.1 and restored configuration. This plugin fails on installation.
error: subprocess-exited-with-error
× python setup.py egg_info …
-
### Version
2.1.6
### Hardware / Firmware
Grbl_ESP32
### What happened
Hi all.
Hopefully someone can help.
This is my first job...I'm using a home made but basic XYYZ configuration. (…
-
I've been working on UI preferences with the UGS Platform and just got visualizer colors hooked up.
I'm not super happy with the defaults I came up. If anyone wants to contribute suggestions, there a…
-
### The problem
Backup file names are starting with "."
This has been happening for some times now, and I am just now getting a chance to open a ticket for it. I have opened a ticket w/ @jneilli…
-
### Description
When using the autoleveler, the adjusted gcode is only shown in the visualizer and there is no way to inspect the altered gcode.
Add a button to be able to export the autoleveled g…
-
Hi,
I'm using LabView to control GRBL v1.1 (downloaded the latest GRBL few days ago). Everything works like charm except that I spotted something which might be a glitch in the jog control. The bug …
-
**Hardware Setup**
I have a Prusa iMK3S, with a Raspberry Pi 4B, which works fine. I can upload the Gcode from Prusa Slicer by Wifi to the Octoprint Server and the printer works fine.
**Describe t…
-
### Bug Description
When I do some prints without restarting the printer in between them, the printer does one of the following two things:
1) When starting the print, right after the printer has …
-
### Version
2.1.6
### Hardware / Firmware
GRBL 1.1
### What happened
When loading a gcode file with an intricate geometry that may have extremely wide radius arcs the UGS sender freeze…
-
### Version
2.1.4
### Hardware / Firmware
GRBL 1.1
### What happened
On both 2.1.3 and the current nightly.
I load this simple ugsd file:
[rectangle.ugsd.txt](https://github.com/winder/Univ…