winder Universal-G-Code-Sender issues

winder / Universal-G-Code-Sender

A cross-platform G-Code sender for GRBL, Smoothieware, TinyG and G2core.

http://winder.github.io/ugs_website/

GNU General Public License v3.0

1.92k stars 768 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Visualizer is not working

#2642 Kibris1977 opened 5 days ago
1
Fix problem with extra line segments on multipoint intersections

#2640 breiler closed 6 days ago
0
New orientation cube using JCSG

#2638 breiler closed 2 weeks ago
0
support lasergrbl

#2637 annopnod opened 2 weeks ago
4
plese edit help about text

#2636 annopnod opened 2 weeks ago
1
Error streaming to GRBL v1.1

#2635 hahnpv opened 2 weeks ago
3
Bump commons-io:commons-io from 2.7 to 2.14.0 in /ugs-platform/ugs-platform-visualizer

#2633 dependabot[bot] closed 3 weeks ago
0
Remove check for returned XY coordinate when probing

#2632 breiler closed 3 weeks ago
0
Orientation cube using JCSG

#2631 breiler closed 3 weeks ago
0
AutoLeveler - Scan surface fails when probing 3rd point

#2630 vinixtito closed 3 weeks ago
12
Filter messages from command response

#2627 breiler closed 1 month ago
0
arduino chino, fallas con UGS sobre mala conexión con el arduino

#2625 PrototiposYPlacas closed 1 week ago
3
UGS will not connect under NCFluid. Problem seems to be connected to Haunyang VFD

#2624 Toolman19 closed 1 month ago
6
Updated miglayout

#2619 breiler closed 1 month ago
0
Bump rollup from 4.21.3 to 4.24.0 in /ugs-pendant/src/main/webapp

#2617 dependabot[bot] closed 1 month ago
0
Update Netbeans and make MacOSX use FlatLAF

#2616 breiler closed 1 month ago
0
Visualizer performance

#2615 breiler closed 1 month ago
0
Bump vite from 5.2.8 to 5.4.6 in /ugs-pendant/src/main/webapp

#2614 dependabot[bot] closed 2 months ago
0
Add support for importing DXF polylines

#2612 breiler closed 2 months ago
0
Error on OrangePi

#2611 KuleshoffM closed 2 months ago
8
Pendant timeout class mismatch

#2606 Erhannis closed 2 months ago
4
UGS wont connect under FluidNC drop down

#2604 itsnotlevel1 opened 2 months ago
8
Added a new visualizer panel for rendering using NEWT for better performance

#2602 breiler closed 2 months ago
0
Lower the precision requirement of the reported probed XY position.

#2601 breiler closed 2 months ago
0
Grbl $ commands cannot be included in a Gcode file

#2600 GrahamJB closed 2 months ago
6
Rasbperry Pi Visualizer works once, time when open a gcode; then no more...

#2599 davemaster opened 2 months ago
6
UGS's Autoleveller fails to recognise successful probe contacts.

#2598 Xaracen closed 1 week ago
27
Fixed the dependency

#2597 breiler closed 2 months ago
0
Spindle not engaging

#2595 CaptainKokomo opened 2 months ago
7
Stuttering mouse movement when Probe Modul is active

#2594 HubertJH opened 2 months ago
0
AutoLeveler Problems

#2591 Cani369 closed 1 week ago
2
UGS does not open

#2588 Jmpm9 closed 3 months ago
1
Add drag'n'drop to the designer for importing files

#2586 breiler closed 3 months ago
0
Add spindle start command to drill operations

#2585 breiler closed 3 months ago
0
Fixes for controller resets

#2584 breiler closed 3 months ago
0
Fixed connection problem with GRBL_ESP32 in wifi mode

#2583 breiler closed 3 months ago
0
Removed old firmware options that no longer works or are being used.

#2582 breiler closed 3 months ago
0
"!8 Err: Unknown command '?:3F'" while trying to connect to iDraw 1.0

#2578 thmsgbrt closed 4 months ago
4
Added actions for aligning entities in the designer

#2577 breiler closed 4 months ago
0
Pendant pin status

#2576 breiler closed 4 months ago
0
Load the gcode model when opening the visualizer

#2575 breiler closed 4 months ago
0
Add better error message when FluidNC configuration is broken

#2574 breiler closed 4 months ago
0
Issue with FluidNC configuration parsing when connecting

#2573 ColPaulR closed 3 months ago
2
Autoleveler opening a scan containing negative space coordinates fails

#2571 rurigk opened 4 months ago
1
Visualizer doesn't work if you open the visualizer after opening the gcode file.

#2570 lagnat closed 4 months ago
1
Joystick options panel is broken on one machine; works on another

#2569 JamesHagerman closed 4 months ago
2
Manjaro / Arch linux : Error opening connection: Could not connect to controller on port jserialcomm://ttyUSB0

#2568 SvenMeyer closed 3 months ago
3
Minor fixes

#2567 breiler closed 4 months ago
0
Adjusted how scrolling and zooming works in the designer

#2566 breiler closed 4 months ago
0
Stopped talking to X-Carve

#2565 PeanutsWoodshop closed 4 months ago
3