-
V modulu je snaha oddělit GND od GND základní desky. Na modulu se však nachází tato chyba:
![image](https://github.com/mlab-modules/SOLARMINIBAT01/assets/5196729/9edbd49c-8d85-406b-b1cf-117088f551…
-
Hi,
I just build this device. Worked on first try! (nice job)
Sort of.
The OLED exists in multiple variants. I2C and SPI. While i bought the correct one 4pin, the pinout was VCC GND I2c i2c. Yo…
-
This looks new since there is no crash after error
The design is very very small and simple
Vivado works
[ERROR_Invalid_global_constant_node_INT_L_X0Y60_GND_WIRE.zip](https://github.com/user-attach…
-
### Enhancement Summary
Help for setting up BME680 Humidity/Temp and Gassensor inside NSPanel
### Detailed Description
I install a BME680 Sesor inside the NS Panel for acurate Humidity and Te…
-
Hello
This wiring is SPI, but after uploading the ReadTag.ino code, the message "Didn't find PN53x board" is displayed.
My Board :
`Wemos D1 Mini`
My Wiring :
```
SCK => D5
MISO => D6
MOS…
-
### What happened
```
## Expansion ports
# EXP1 header
# EXP1_1=PB5, EXP1_3=PA9, EXP1_5=PA10, EXP1_7=PB8, EXP1_9=,
# EXP1_2=PA15, EXP1_4=, EXP1_6=PB9, EXP1_8=PD6, EXP1_10=,
```
##…
-
Can you give me the configuration parameters for a CC1101 to put in the json
And confirm that my connection to my ESP12 is OK ->
GD00 - D1
GD02 - D2
SCK-D5
MOSI-D7
MISO-D6
CSN-D8
VDC - 3.3v
G…
-
In Qucs there is convergence problem in transient simulation when ground is not present especially for non linear components. As most new users(like me) do not specify ground as it is not mandated, I …
-
Hello,
I am trying to simulate frequency response of a filter with JoSIM by creating a Gaussian excitation and then doing Fourier analysis on the output. I saw that the S-parameters I calculate don't…
-
As you can see from this screenshot, IO2 seems to be grounded. I was wondering if there was any particular reason for this?