-
### Describe the Bug
The Brass Funnel from the Create Mod fails to properly collect smelted items that match the filter criteria.
### Reproduction Steps
1. Place a Brass Funnel without a belt leadi…
-
I have my WLAN connection code in boot.py file but unless I command _wlan.deinit()_ before _machine.reset()_ the WLAN will not reconnect at boot time. If that happen WLAN does reconnect if _wlan.conne…
-
### SOC
ESP32
### Lora IC
SX1276
### Product Link
https://pycom.io/product/lopy4/
### Description
No GPS
Tested on 1.2.65. Not yet tested on 1.3_
[Forum Post](https://meshtastic.discourse.gro…
-
In my application object I have a test() method making use of UART bus 1. CO2 sensor transmitting messages (with format " Z 01540 z 01575\r\n") every 500ms is connected to this bus via pins P3 and P4.…
-
I noticed at the bottom left of the tool bar arduino-create-agent--> open debug console in chrome, it has a textbox and a send button. If you enter
```
list
```
It gives a list of connected d…
-
Hello everyone,
I'm using a Lopy4 board.
Firmware:
(sysname='LoPy4', nodename='LoPy4', release='1.18.2.r7', version='v1.8.6-849-df9f237 on 2019-05-14', machine='LoPy4 with ESP32', lorawan='1.0.2'…
-
rshell 0.0.28
Windows 10 , driver : microsoft usbser.sys
Board : Pytrack (lopy4) , Pycom MicroPython 1.18.2.r7
Each time i try to get file from lopy i'm facing an error (exception)
I can do repl, …
-
### Describe the Bug
While placing Train Rails my game crashes, Very rarely while driving trains (happened once). It only seems to happen occasionally and not fully sure what triggers it. I am runnin…
-
Hi,
Trying this out to see if I can decode raw LORA test messages sent by my new LoPy device. When I run the lora_receive_realtime.grc flowgraph, I see "Failed to connect to analyzer." in the consol…
g0hww updated
5 months ago
-
Using a gy-91 which contains a mpu9255 and a different model AK8963
Changed in AK8963.__init__
`if 0x48 != self.whoami:`
to
`if self.whoami not in (0x48,0x5F):`
in AK8963.magnetic (was getti…