tuupola micropython-mpu9250 issues

tuupola / micropython-mpu9250

MicroPython I2C driver for MPU9250 9-axis motion tracking device

MIT License

141 stars 47 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Whoami validation

#31 LubosKuzma opened 4 months ago
1
Error on initializing MPU9250 I2C

#30 RuudKapteijn closed 7 months ago
5
Apply 2023 chores

#29 tuupola closed 7 months ago
0
Reset sensor during init, add MPU6700 support

#28 fxsheep closed 7 months ago
4
Can not use AK8963

#27 ttyyzz34 opened 1 year ago
1
AK8963 - [Errno 5] EIO

#26 serdaraltin closed 1 year ago
3
OSError: [Errno 5] EIO

#25 project2501x closed 1 year ago
3
MPU-9250 AK893 is not detected

#24 pkoprov closed 2 years ago
2
TypeError: 'id' argument required

#23 Robotayylien closed 4 months ago
7
Using the library for Microbit

#22 Essalsolami closed 7 months ago
2
MPU6500 class fails to initialize when used from MPU9250 class

#21 k79fi closed 3 years ago
3
Add documentation for gyro calibration

#20 tuupola opened 4 years ago
0
Convert to ampy instead of rshell

#19 tuupola closed 4 years ago
0
Add missing temperature property to MPU9250

#18 tuupola closed 4 years ago
0
Move I2C bypass initialisation to MPU9250

#17 tuupola closed 4 years ago
0
Allow using standalone MPU6500 (fixes #15)

#16 tuupola closed 4 years ago
0
RuntimeError: MPU6500 not found in I2C bus.

#15 varna9000 closed 4 years ago
9
ImportError : cannot load module i2C

#14 jiamingbacon closed 4 years ago
3
[Errno 19] ENODEV

#13 pidou46 closed 3 years ago
14
gy91 mpu9255 and new ak8963

#12 hortovanyi opened 5 years ago
8
Support for accelerometer calibration (fixes #6)

#11 tuupola opened 5 years ago
0
Support for gyro calibration

#10 tuupola closed 5 years ago
0
Support for internal temperature sensor (fixes #1)

#9 tuupola closed 5 years ago
0
Fix gyro degrees to radians conversion

#8 will121173 closed 5 years ago
2
Strange data from the gyroscope of mpu9250

#7 vvkuryshev closed 5 years ago
1
Add accelerometer calibration

#6 tuupola opened 6 years ago
0
Add gyro calibration

#5 tuupola closed 5 years ago
0
Add magnetometer calibration

#4 tuupola closed 6 years ago
0
Support AK8963 sensitivity adjustment values (ASAX, ASAY, ASAZ)

#3 tuupola closed 6 years ago
0
Add support for low pass filters

#2 tuupola closed 5 years ago
1
Add support for onchip temperature

#1 tuupola closed 5 years ago
2