-
The _Opla IoT Kit "Get To Know The Carrier"_ project is available on this page:
[https://opla.arduino.cc/opla/module/carrier/lesson/get-to-know-the-carrier](https://opla.arduino.cc/opla/module/carrie…
-
Currently, sensord and sensors.qcom use about 10% of a core. sensord should be able to work without the qualcomm daemon and without going through android.
-
This is more of a question than an issue. I initially wrote a userspace driver for lsm6ds3 but later found out that there is already a kernel IIO driver.
But after some investigation, I saw that the…
-
hi folks - we get about 1 request every week or so for us to change our libraries so people can pass I2C pin numbers into Wire.begin()
We can't merge these PRs because official Arduino code style h…
-
This was working fine on my Windows machine, but I've recently tried building my project fresh on my Linux machine and it is refusing to build due to missing files like `Print.h` and others. I suspect…
bazfp updated
3 years ago
-
[Enter feedback here]
I just received my Seeed MDB, updated the device OS (20.09) and Visual Studio is running 20.09 as well, the device was claimed and connected over WiFi. When I uploaded the sa…
K0I05 updated
3 years ago
-
I am trying to use an hr timer with the st_imu68_i2c driver and the LSMDS1 IMU sensor. But even though I have the CONFIG_IIO_BUFFER enabled, the scan_elements, trigger, and buffer directory are missin…
-
In the [LSM9DS1 self_test example](https://github.com/STMicroelectronics/STMems_Standard_C_drivers/blob/master/lsm9ds1_STdC/example/lsm9ds1_self_test.c), the self-test values for the gyroscope are as …
-
The current micro:bit version 1.5 uses a single LSM303AGR accelerometer/magnetometer chip. Might be a close relative of the LSM6DS3 driver you have here? The older 1.3b version uses MMA8653 + MAG3110.…
-
I'm having some trouble changing the sampleRate and bitRate of recordings from their default values of 16000. If anyone has done this and could help me out I'd really appreciate it.
Here's my start…