-
## Current Behavior
I have a standard 5" quad with Matek F405STD board. VL53L1X connected via I2C is detected and status OK. Sensor output in configurator always shows -1 cm. Same setup works great w…
fraro updated
10 months ago
-
I released a crate- [rust_gpiozero](https://crates.io/crates/rust_gpiozero) which is a Rust implementation of the python [gpiozero](https://gpiozero.readthedocs.io/en/stable/) library.
The idea of…
-
The addition of MPU6050 support in INAV 6.1.1 and INAV 7.0.0 is excellent work , I have added MPU6050 to INAV 6.1.1 but the board is not booting after changes in common_hardware.c oather all files ch…
-
Hey bro, My flight controller suddenly stopped working.
I have flashed firmware 3 times, it flashes and connects to iNAV but the sensors are not working :(.
-
i have several MPU6500 and i want to get the Yaw value as well, as i see your library only gives pitch and roll and due to the missing magnetometer yaw is dificoult to get (or so i understand).
i a…
-
Hi, my nanopi use m.2 edge tpu not work, and I have follow start web page and issue42 to build some file, but I can't find some c file in my system, can you give me some suggest? thanks
**pi@NanoPi…
-
### Describe the bug
If rx protocol SPEKTRUM is selected in Firmware Flasher for 4.5.0 RC3 I get the following compile error
`In file included from ./src/main/pg/rx.c:29:
./src/main/pg/rx.c: In f…
-
I have a MPU-6050 and was trying to make it work with FastIMU, unfortunately i get an error code of -1, that lead me to thinking that my sensor was broken, but when I try to read raw data from it I ge…
-
### Describe the bug
First of all, my flight control is AOCODARCF722MINIV2. Use‘’ https://github.com/betaflight/betaflight/releases ‘’to download betaflight_4. 5.0 _STM32F7X2 Hex and betaflight_4…
-
Hello,
currently the sensor MPU-92.65 is working in betaflight and the sensor MPU-9250/6500 is not working (Flag: NO_GYRO)
The interesting part is, if I plug in the sensor MPU-92.65 open betafli…