-
### Describe the problem
When installing a custom core in the sketchbook, board option menus are not shown. They are shown properly with `arduino-cli`.
### To reproduce
1. Extract the contents of […
-
I was looking to explore re-purposing / programming this badge, and I am looking for a pin-out for the programming header on the badge, along with some tips on a procedure.
Is it using this pinout?…
-
On Mac OSX 10.14.6, attempted to send a simple Blink file to an MSP-EXP430FR5739 (one of the supported boards) from PlatformIO IDE extension installed into VSCode as recommended.
Everything appears …
-
See: https://github.com/littlefs-project/littlefs/blob/611c9b20db2b99faee261daa7cc9bbe175d3eaca/lfs.c#L1631
Statement: `uint8_t eperturb = -1;`
Warning: #69-D integer conversion resulted in a change…
-
Ran into the same issues mentioned in community post [here](https://community.platformio.org/t/msp430-compile-for-debug-bad-o-option/11605)
PIO versions: Home 3.0.1 Core 4.1.0 on Visual Studio Code 1…
JJeng updated
3 years ago
-
Howdy y'all,
I ran into some trouble using mspdebug on an RF430FRL152H chip. This chip is weird in that it is low voltage and in that it uses 4-wire JTAG but not SBW, so I used the modern (black) …
-
We need some extra communication between the CC1352 and MSP430. Adding the I2C signals to the MSP430 would be very helpful.
Use pins 30/31 (P4.1/P4.2) (SDA/SCL).
-
Hi **SpaceTeddy**, thank you for your awesome library for interfacing **CC1101** with **AVR (Arduino)** and **Raspberry Pi**.
However, I have recently added support for **Texas Instrument's MSP430…
-
```
4.6.3 places global constants in the .rodata section. This section gets
discarded in the last build step, i.e. while removing the interrupt vector
table from tosboot. The command below only pres…
-
Hi,
I'm trying to get my [EXP-MSP430FR5969](http://www.ti.com/tool/msp-exp430fr5969) running and it looks like 0.24 is not working with `tilib` and the latest `mspds`. I install [mspdebug](https://…