-
We're going to use an ATX power supply to provide power for it all, as that allows us to reuse existing old computer gear, and should provide enough power for ~500 neopixels (so enough for any individ…
-
I’ve been thinking a bit more about this, and we might struggle for pins after all – Currently we have 14 channels of Darlington pair drivers (of which 12 are used). Extra things we might like are:
…
rwb27 updated
6 years ago
-
I am currently using a Xol toolhead and wired the LED harness as per their [instructions](https://github.com/Armchair-Heavy-Industries/Xol-Toolhead/blob/main/docs/led_harness.md). It uses 1x WS2812B 5…
-
Right now our front end does not differentiate between when it's connected to our device and when it is not.
Differentiate between the two states
Data modelling wise a good starting point would be t…
-
currently there is no way to deactivate the internal RGB status flashes without completely deactivating all RGB functionality (then you cannot use the rgb at all anymore in your code)
i propose to …
-
A big task, but we should see if we can add neopixel support.
-
**Describe the bug**
Very simple programs using `analog write` block to set an analogue value on a Circuit Playground Express board's **A0** pin/pad (true analogue, not PWM) error immediately with a …
-
Hi,
After receiving all the items I needed to do the built I managed to get everything working with neopixel and a arduino pro mini! It works great and I'm really happy with it 👍
There is one is…
-
Hi,
We start using Firmata for some interactive projects mixing computer for UI and Firmata to control HW component.
Some of the HW (like Neopixels) have proprietary protocols, so we need to use…
-
Hi all, I've spent a couple of hours trying to get some neopixels working on this board to no avail. I appreciate that I'm working outside of the master/dev branch, but hoped someone would have had so…