-
```
I am using a Raspberry Pi with nxt-python-2.2.2 to control a small robot I have
built. I have been able to use the test_sensor.py program successfully, but
when I try to use the HiTechnic motor …
-
```
What steps will reproduce the problem?
1. in motcont, ports 3 4 and 5 refer to multiple motors and if one activates
them, the "interval" is tracked for such port rather than for the motors
indiv…
-
I just installed the 6.50 Beta, did a restore, Save, then did the Motor Setup and Save, did the Throttle calibration and Save.
Here is what I have found so far:
Bugs in the Power Tuning window
- …
-
```
What steps will reproduce the problem?
1. NXT 1.0 brick is connected.
2. Run a python program with the following code:
import nxt.locator
b = nxt.locator.find_one_brick()
What is the expe…
-
Hello,
The example does not seem to work fine.
Using
```
var NXT = require('nxt-api');
// start your NRS client first
var API = new NXT.API('http://:');
API.getNextBlockGenerators().then(function …
-
```
What steps will reproduce the problem?
1. get a fresh install of nxt-python 2.2.2 working on Linux, connected to the
brick via USB; the brick is running the latest leJOS firmware 0.9.1
2. check …
-
```
What steps will reproduce the problem?
1. in motcont, ports 3 4 and 5 refer to multiple motors and if one activates
them, the "interval" is tracked for such port rather than for the motors
indiv…
-
```
What steps will reproduce the problem?
1. in motcont, ports 3 4 and 5 refer to multiple motors and if one activates
them, the "interval" is tracked for such port rather than for the motors
indiv…
-
```
What steps will reproduce the problem?
1. get a fresh install of nxt-python 2.2.2 working on Linux, connected to the
brick via USB; the brick is running the latest leJOS firmware 0.9.1
2. check …
-
```
Hey,
Could someone please help me, the frameworks not creating the object properly
I've tried this but it comes up with compiler error "_OBJC_CLASS_$_NXT"
Here's my simple code
NXT *nxt = [[NXT…