-
### The problem
OTGW suddenly stopt working. Not able to reload or start after restarting HA.
### What version of Home Assistant Core has the issue?
2024.3.1
### What was the last working version …
-
### The problem
Since the update to 2022.7.x I'm not able to connect with my serial connected OTGW.
### What version of Home Assistant Core has the issue?
2022.7.7
### What was the last working ve…
-
Nie mogę się połączyć z piecem z komunikacją Openterm
{I cannot connect to a gas furnace with Opentherm communication}
Z tym https://github.com/rsciriano/ESPHome-OpenTherm
I konfiguracji
```
// …
-
Hello,
Do you think is possible to send Room Temperature and Outside Temperature from HA to opentherm ? I'm running nodoshop's opentherm gateway in conjuction with your OTGateway and it supports ID24…
-
In the home assistant opentherm gateway integration I ran into a setup problem, where the setup never succeeded. The source of the problem seems the be an SE response on the first PS request.
init_…
-
### Describe the bug.
Hi @bouwew
I found an issue with Anna/Adam.
Well now using the heater again the regulation mode doesn't turn off @ adam.
Even when the regulation mode is turned off (sho…
-
All the entities created by the integration are unavailable. I'm not able to reload the integration, due to errors.
Home Assistant 2024.4.4
Ariston NET 0.19.1
My Ariston device is a Velis Evo2, m…
-
```
16:53:49.052 RQ --- 21:041873 18:010547 --:------ 01FF 026 00802A2A2CD0008000243028320000440280800280FF800400A4 < AssertionError(Support the development of ramses_rf by reporting this packet (002…
-
I've built a gateway using this library. One end is connected to a Google Nest, and another to a boiler. I'm seeing a lot of instability in the messages. Examples are: invalid thermostat and boiler me…
-
I just installed your integration, my otgw does not accept the set point command. Is there a minimum firmware version required? Am on 6.1.
I use a serial connection, can confirm other values are r…