-
The updated `settings.json` content in the `update_vscode_json_to_sdk1_5` branch contains a `)` where I should not be.
https://github.com/raspberrypi/pico-project-generator/blob/2ab988c000f7d5ded517c…
-
I looked on various threads to see how it is with the LED indication I found some descriptions that it changes red for orange if I understand correctly to make the unsynchronization more obvious.
…
-
Hi All,
I've just run through the SDK Getting started guide using a Pico 2 and SDK 2.0 under visual studio code as mentioned in the getting started guide. When running the debug routine using a pic…
-
I wouldn't know where to start so I asked the One Who Is Wrong With Confidence (ChatGPT) for an example and got some sample code which probably was not worth sharing (so I've deleted the noise I origi…
-
### The problem
esp32_ble_tracker cannot be used when sending a config to Pi Pico W, because it requires "esp32"
### Which version of ESPHome has the issue?
2022.11.2
### What type of installation…
-
Environment: Windows 11, SDK 2.0.0, trying to build a project for the Pico.
The issue is that when trying to perform a **cmake -G "NMake Makefiles" ..** or **cmake -G "Ninja" ..** there is a messag…
-
Raspberry Pi Pico W now support WiFi & Bluetooth.
https://datasheets.raspberrypi.com/picow/connecting-to-the-internet-with-pico-w.pdf
Is it possible to connect using rust?
-
### Description
I need to read a temperature sensor value and assign it to it's register only when the register is requested from master.
I understand that this must be done by `on_get_cb` callbac…
-
https://github.com/raspberrypi/pico-sdk/blob/6a7db34ff63345a7badec79ebea3aaef1712f374/src/rp2_common/hardware_vreg/include/hardware/vreg.h#L26
I want to set the voltage to 0.80V but realize its not…
-
The weact studio boards use the Adafruit VID, with a PID from Raspberry Pi, assigned to the YD RP2040
This one: https://github.com/raspberrypi/usb-pid/commit/690a77c1e3061db7aa20557bd422ba0b707a190…