-
I have edited my code so it can be the same for everyone. Please let me know what else I must fix. Thank you!
-
Hi. I have old switches on ESP8266, with firmware HAA 11.9.1 I replaced the router and they did not want to update.
Removed, reflashed to current HAA 12.12.3, but in the end the problem is Verifying …
-
I would like an information if possible about the sming.
I programmed it in the first version of Sming and it worked perfectly, I downloaded version 3.7.0 and now from 3.7.1 when I write the program …
-
## Context
In many cluster we want (or have to) setup different VLAN for server and their BMC.
In case of shared port for BMC and server the current situation is quite complex to deal with.
To …
-
Compiling Basic_OTA sample I found the error
```
Basic_Ota: Invoking 'all' for Esp8266 (debug) architecture
awk: syntax error at source line 1
context is
BEGIN { print (ARGV[1] % (1024*1024))…
-
Homekit does not control GPIO Outputs for the built-in LED and relay. The built-in button does not change the state of the switch in homekit.
**Detailed steps to reproduce it**
-flesh fullhaab…
-
After erasing flash, and flashing the firmware, I am able to configure wifi network and OTA repository. For the OTA repository I used "AchimPieters/ESP8266-HomeKit-Temperature-Humidity-Sensor" and for…
-
Dear all,
i've installed esp-idf 5.3 with Sming master branch. when I try to compile a sample like Basic_Blink i receive a lot of error:
any suggestion? I've also tried with SMING_RELEASE=1 without …
-
```
esphome:
name: pylontech
friendly_name: Pylontech
esp8266:
board: esp01_1m
# Enable logging
logger:
baud_rate: 0
# Enable Home Assistant API
api:
encryption:
key:…
-
I'm experiencing the above error when running an OTA on my firware. The OTA seems to not update the spiffs partition, but I'm not sure if this is a result of the above Error.
What I could find about …