-
Currently you have OE logic limited to range 50-3000ns. Why? This is not likely required, the current logic supports 16 to 16384. You could improve this to support just about anything in 8ns steps.
…
-
## Description
## Expected Behavior
## Current Behavior
## Steps to Reproduce
1.
2.
3.
## Your Environment
* Processing version:
* Operating Syst…
-
#### Description
Monitor ARM GPU thanks to the [vcdbg](https://github.com/nezticle/RaspberryPi-BuildRoot/wiki/VideoCore-Tools) command line.
Have a look on the following Python code: https://git…
-
I get screen garbage after using the screen for a couple of minutes.
Any idea howto fix this ?
-
Steps in setup of MotionEyeOS system
sed Raspberry Pi Imager v 1.6.2 on Ubuntu 20.04.3 LTS
Wrote motioneyeos-raspberrypi4-20200606.img.xz and Verified it to Micro SD Card 16GB, SanDisk Ultra.
Cam…
-
I found that rpi-fbcp is having some performance issues, so I replaced the one bundled in your image with the fbcp-ili9341 one found here: https://github.com/juj/fbcp-ili9341
The difference is nigh…
-
Hi,
My idea is to implement some sort of logging mechanism.
I added my own taste of course, but would be benefitial to implement a light logging. Would you consider to add it, @vitoplantamura ?
…
-
First audit message, audit initialization, on aarch64, has zero-second timestamp. The msec counter appears to be running. It appears audit is initialized before the system clock.
Ex:
audit: type…
-
I have only added the absolute minimum amount of post-boot init code that’s required to talk to the GPIOs so far. As a consequence, the CPU runs only at ~6.5 MHz, which is the frequency the RP2040 get…
-
### Operating System
Linux
### Arduino IDE version
2.0.3
### Board
PICO rp2040 from RP
### ArduinoCore version
PICO/RP2040 community 2.7.0
### TinyUSB Library version
release
### Sketch & Co…