-
Hi @ndoo 👋
Now I find myself on _your_ repo. I'm super interested in this project! I'd love to up the refresh rate of my signs by bypassing the old control boards. Your work here seems really thor…
-
Technical Level
beginner
I want to use the Grove - 4-Digit Display ( http://wiki.seeedstudio.com/Grove-4-Digit_Display/ )with nrf-52840 mdk using the base dock.
I am not able to write the two-wire …
Yug11 updated
5 years ago
-
When contacting support about it not working, "Joney" said " I am really sorry about it." and stop answering afterwards.
I am leaving them bad reviews everywhere until seeedstudio and other resel…
-
[https://forum.seeedstudio.com/t/wio-rp2040-mini-dev-board-please-provide-complete-api-or-repo/262961](https://forum.seeedstudio.com/t/wio-rp2040-mini-dev-board-please-provide-complete-api-or-repo/262…
-
When trying to use the Xadow breakout board with an Edison, I am unable to access some of the pins that would appear should be addressable.
I am trying to use the buzzer and/or vibration motor, that …
-
I'm a pretty new user of Grove modules. I have successfully run 16x2 LCD and ultrasonic ranger with that Python library but I can't run IMU9DOFICM20600 (gyro/accelerometer/compass) with it.
What I …
-
This currently does not work with the 2.72 / 8M hardware. Some fixes can be found here: http://www.seeedstudio.com/forum/viewtopic.php?f=26&t=5128 due to the change in sector size.
Note that this has…
-
I think I have another issue to share.
If I set up the device Seeedstudio LoRa-e5-Mini with the following command, a wrong message (presumably the configuration) is sent to the device:
```
$ wsni…
-
Hello!
The GL-AR150 is discontinued and also not available anymore on amazon.de/nl.
It might be useful to provide a list of alternatives!
https://www.seeedstudio.com/LinkStar-H68K-1432-p-5…
-
```
We will prepare a detailed, step by step documentation explaining explaining
following topics:
1. Setup tools and environment
2. Upgrade Firmware
3. Start building your own firmware
4. UI modific…