-
# Signals oscillate in diferent Thresholds
Recently I have been engaged in my Conclusion Project of an technician course in electronics...
When trying to use two pulse sensors at once, in order…
-
Not sure how to describe the problem other than that it won't work most of the time. Every now and again it can print the output from my Arduino Nano (using single Serial.println()). Most of the time …
-
Is it possible to add support for the Brother Design n cut (DC 100), might be DC 200 outside Europe.
Thanks for any suggestion
-
Hello,
I've tried to run the code as is. There are several errors I've seen trying to run it. (I'm using an Arduino UNO).
Most of the errors seem to be that variables and pins were not defined…
-
Hi,
i am making a little stream deck. I use 3 potenziometer 10K linear.
Arduino nano 33 IOT - connected beetween 3.3v and gnd.
The exist value of potenziometer are very unstable. I tried both USBMI…
-
**Describe the Failure / Bug**
A clear and concise description of what the failure / bug is.
Short Summary of the expected behavior: LCD display should show the default booting message and serial mo…
-
Dear All,
I'm trying for several days to control a SilverCrest switch using an ESP8266 a MX-FS-03V module and a MX-05V module to record the signals.
![img_20180109_232332](https://user-images.gi…
-
Hi there!
Need a little help wit SSD1306 (0x3C) display.
Getting no picture with your code.
This code works from arduino ide example:
```
#include
#include
#include
#include
#defi…
-
Hi,
I use 2 arduino pro mini's @ 16mhz with one running the transmitter example and one running the receiver example. There are no changes in the examples except the transmit and receiver pin numbe…
-