-
Installed via HACS and configured the integration to use the inverter IP (dhcp static assignment), logger serial number and the deye_sg04lp3.yaml.
Inverter serial# starts with 221...; logger with 2…
-
Hi !
The script is not working for me. After installation and config, i become the Error Message:
**Exception Occurred**
Error on line 162:35: TypeError:
undefined is not an object
(evaluating …
-
I have a Deye 600 Micro inverter.
When the sun is no longer shining, the inverter goes into sleep mode. Then I get lots of error messages in the logger.
Maybe you can determine if the logger is o…
-
I add two microinverters but they are disconnected. I've tried with 0.0.0.0 and SN 0 doesn't connect either. Can anybody help me?
-
Intergration will not accept a device serial number that starts with a Letter.
Mine starts with E4A........
-
Hello,
here is some information from my Sofar 4.4KTLX-G3. The logger's serial number is 2369645124 and firmware version is LSW3_15_270A_1.53.
The first register is set to 0x0400 and the last is …
-
My Serial number starts with 27. I manage to connect to my Afore Inverter using the definition for Afore inverters. But there is no menu item on the inverter to change to modbus like it suggests in th…
-
Hello,
I try to init this integration for my deye controller SN : 39XXXXXXXX but it doesn't work :/
in this doc ->
> Check the version of the solarman logger. If the serial number starts w…
-
I first tried the LSW-3 logger and I could connect with home assistant to the logger and get data.
But I don't have good WLAN in the cellar where the inverter is installed. So I switched from the wi…
-
Hello,
I own a Deye SUN600G3-EU-230, that is currently connected to a single panel with 420W for testing purposes.
Here's my current configuration:
```
HA version: Home Assistant 2023.1.7
Inv…