-
I finished my build and did calibration, but my CV out voltage remains constant instead of the expected stepped random voltage. It varies with the position of the scale pot, but does not change with t…
-
Choose which shield we should use (optionally more than one):
- Arduino custom shield
- Shield n.1 https://www.amazon.com/10pcs-XD-212-Multifunction-Expansion-arduino/dp/B0BYXYZF6W
- Shield n.2 https:…
-
```
What steps will reproduce the problem?
1. tried importing and laoding several versions catdiag and catgenie
2. tried with power on catgenie, and power off,
3. see print screen attached.
What is t…
-
```
What steps will reproduce the problem?
1. tried importing and laoding several versions catdiag and catgenie
2. tried with power on catgenie, and power off,
3. see print screen attached.
What is t…
-
I'm trying to flash a Stirling Tower Fan purchased from Aldi in Australia. It appears to be the same as the fan listed here: https://templates.blakadder.com/sichler_NX4538-944.html
I opened up the …
-
Hey there!
First off, thanks for putting this out there @fryc88! Long story short, I was going to Klipperize my Sovol SV01 Pro, but hit an issue on the last print that I did before that. The part…
-
```
What steps will reproduce the problem?
1. tried importing and laoding several versions catdiag and catgenie
2. tried with power on catgenie, and power off,
3. see print screen attached.
What is t…
-
```
What steps will reproduce the problem?
1. tried importing and laoding several versions catdiag and catgenie
2. tried with power on catgenie, and power off,
3. see print screen attached.
What is t…
-
```
What steps will reproduce the problem?
1. tried importing and laoding several versions catdiag and catgenie
2. tried with power on catgenie, and power off,
3. see print screen attached.
What is t…
-
[featurerequest]
Well now that the only possible way to gain loads of pressure easily has been removed, there needs to be a new method of boosting pressure.
Instead of using the RPD and two sheets…