-
### The problem
Climate controllers start in the off state, one must use `on_boot` to set the desired default state, [cumbersome](https://github.com/esphome/issues/issues/2233).
`default_mode` w…
-
ets Jan 8 2013,rst cause:4, boot mode:(3,6)
wdt reset
load 0x4010f000, len 1384, room 16
tail 8
chksum 0x2d
csum 0x2d
v09826c6d
~ld
tried even a file from someone else, same issue. Tr…
-
I have the following configuration.... the problem is that when I click on the off button, the climate object turns off, but the switch (the sonoff) is not set to off (so the heater stays on). Maybe I…
-
I want to control a blind with a Sonoff Dual R3. When you set up it using eWeLink app, you can choose switch, motor or meter. If you select motor, it won't appear on Home Assistant entities list. I ha…
-
Manage network settings from web gui.
-
- Operating System: OSX, Linux
- Python Version: 3.5.3
- Sonoff model: 1 Channel relay firmware 1.7.0
I have two of these devices, one worked just fine and the other fails all the time. It gets t…
-
The Sonoff GK-200MP2-B is a GK7102S based camera that uses the eWeLink app for configuration and control. I tried the readonly and read/write hacks with no success. Unfortunately I don't think there's…
-
my accessory is in homekit but it does not respond in the application I think the error comes from the file json.conf
in the console tasmota the server mqtt works well
do you have an idea? thank you…
-
### The problem
I have updated 2 wemos NodeMCU to the new version and after that the devices went offline, I have hooked them up to USB and get the following logs. No change has been made to my wif…
-
```
homeassistant:
# Name of the location where Home Assistant is running
name: Home
# Location required to calculate the time the sun rises and sets
latitude: -22.7879
longitude: -43.…