-
Hello,
I am successfully using this firmware with [LR1302 from Elecrow](https://www.elecrow.com/lr1302-lorawan-gateway-module-spi-eu868-sx1302-long-range-gateway-module-support-8-channels.html) and…
-
Hello I am actively working to improve the ease of use of the T-deck
I propose here a "nano" module which allows text editing directly on the t-deck
https://github.com/Freyr86/Emu-nano-linux-for-L…
-
My system works with E220-400M22S and E220-400MM22S on various controllers like STM32F7, ESP32 with LoRaRF Arduino library.
I am able to receive and transmitt.
Trying to make it work with RPi with n…
-
Hello,
First of all thank you so much for this library to be available for everyone!
I use T-Deck plus (with SC126x radio) in combination with Helium-IoT Console and see that I receive a JoinReque…
-
For SX126x (and SX128x and LR11X0) radios, a CRC mismatch is returned when either the header CRC or the payload CRC is incorrect:
https://github.com/jgromes/RadioLib/blob/d3f9eaf30b438faa2406982a75f5…
-
**Describe the bug**
A clear and concise description of what the bug is. When applicable, please include [debug mode output](https://github.com/jgromes/RadioLib/wiki/Debug-mode) **using the appropria…
-
Hello, I have a Heltec Lora 32 v3 board because a Lora 32 v2 board was no longer available. Is it possible to adapt the software for the Lora 32 v3?
-
This is a follow-on from #119 which never seems to have adequately resolved.
In addition to getting ~300uA on VDD_MCU when the event loop is idle, I always see ~1mA on VDD_USB. I believe this is …
-
This repository is no longer maintained. The recommended alternative is the [MCCI version of LMIC](https://github.com/mcci-catena/arduino-lmic), which is based on this one, but has seen much improveme…
-
**Is your feature request related to a problem? Please describe.**
I want to deep sleep on an nRF52840 and also turn off power to my LoRa module. After waking up from deep sleep, I'd then re-power th…