-
Hello!
Our board consists of a 480x320 TFT / RP2040 combination.
The TFT SPI clock rate in my situation is 24MHz (via User_Setup.h) but I use an ADC running on max 1MHz so I use SPI.beginTransacti…
-
你好！这个什么屏幕都能够显示吗！还有想问一下怎么添加到战舰的那个综合实验程序里呀，就弄到屏幕桌面上去
Sent from PPHub
-
**Description:**
I am attempting to use the library to display a GIF from an SD card on a GC9A01A display on an ESP32-WROOM32.
When a GIF is loaded, there seems to be a memory leak as the Arduino …
plain updated
2 months ago
-
LCD works fine when I use ESP32 library ver2.0.2 but when I update ESP32 library to 3.0.5, ESP32 falls into boot loop
17:40:08.708 -> rst:0x3 (RTC_SW_SYS_RST),boot:0xc (SPI_FAST_FLASH_BOOT)
17…
-
Hi, i tried to build and load your program but i have some problem.
git cloned the repository
waited for all the depandanciens
config.h changed
file in .pio changed but no fortune at all:
log of …
-
Hello, I have the problem that the touch no longer works after the update.
The update itself works fine, no errors.
I can see the new frontend but the touch doesn't work.
At the end of the update …
-
**Account Information**
My IGN on Riot is Equmenical#4645
I normally play both TFT and League of Legends
**Issue Description**
When I was trying to load TFT and League of Legends I would get t…
-
"question"
Any ETA on TFT side @dolejska-daniel ?
-
thanks for your great work, I been trying to compile with platformio your code, the TFT_ST7735 lib folder is empty and I have yet to get any TFT_ST7735.h lib files to work tried
bodmer TFT_ST7735 …
-
After TFT flashing of a Genius Pro i only getting the "failed o enable bed leveling" screen which can be clicked away. and than i cant connect via USB anymore to the printer, to continue with the marl…