-
开个新坑
用hub芯片扩展USB接口，这样就可以同时使用ttl和f1c200s的USB了
![屏幕截图 2022-05-08 22411…
-
When starting Satdump in CLI or GUI mode on the Raspberry Pi, the starting frequency isn't correct. In the GUI, when you change the frequency the SDR sets to the correct frequency. The CLI version can…
-
### Checklist
- [x] I acknowledge that support is provided on a best-effort basis.
- [X] I acknowledge that the authors and contributors to this repository cannot be held responsible for the resul…
-
When I use an usb stick to boot linux, all goes well.
If I attach the calculator to an powered usb-hub with the usb stick in the hub, the stick isn't found.
Though sometimes it works, other times i…
-
In another issue in the list I saw that using "{A5DCBF10-6530-11D2-901F-00C04FB951ED}" as the GUID lists all devices, however it only listed composite devices when I googled, whereas I need a hub.
…
-
Hi,
I have flashed a CX919 (RX3188) on June 2016. It runs very well and it is very stable. Great work !
But, the CX919 have just one USB port and your software doesn't manage a USB HUB.
Could you expl…
THX59 updated
8 years ago
-
Steps to recreate:
1. Install Windows on an external SSD and make sure the monitor is the primary display in the Windows installation.
2. Boot into SteamOS and install Clover without any USB hubs or…
-
Sometimes the USB keyboard gets never detected if I plug it in after the kernel boots.
The workaround is to boot with the keyboard plugged-in, then everything works fine
The kernel messages that…
-
Did everyone ever managed to connect the Raspi Zero to a USB Hub while keeping injection of keystrokes working?
I tried it with the "Zero4U 4-PORT USB HUB FOR RASPBERRY PI ZERO".
The Hub works fine,…
-
Would it be possible to implement support for USB hubs in the same way that stock IOS58 does? It's not that important on a regular Wii, but with the Wii Mini only having one USB port it would be conve…