-
There is electrical humming sound coming from wemos D1 mini v2 module.
we are using 5v 3A power supply connected to 5v input pin. I suspect its the power input which cause sparking/humming sound. Al…
-
Hi, this project is excellent, but I've run into some issues when using the system with an ESP8266 (a Wemos D1 Mini specifically). Basically the output "glitches" constantly depending on the effect I'…
-
![Banner](https://i.imgyukle.com/2020/01/30/VAlH1h.png)
İki gün önce Özgür Linux Kampında Python ile GUI programlama kursuna katıldım. Orada WEMOS marka bir mikrokontrolcü kazandım. Daha önce…
-
Hey all,
is this library compatible with the D1? My goal is to use it as interface between an Arduino Uno and the D1 over Serial. However I can't seem to compile any of the example files for the D1…
-
### Platform
ESP32
### Assembly
I did the assebly by myself
### nRF24L01+ Module
square dot
### Antenna
external antenna
### Power Stabilization
Elko (~100uF)
### Connection picture
- [ ] I…
-
thank you for this great library.
i have an issue with msc sd device example , some times it works some times not, i am using wemos esp32 s2 mini hardware
are there any special configuration to…
-
![C1101 s2_mini_v1 0 0_4_16x9](https://github.com/chester4444/esp-multical21/assets/6534549/b8d284e6-dc3d-4639-9e8a-3b7bd75c5419)
Confirmed it is working with Wemos S2 Mini
[env:esp32]
framewor…
dkcsn updated
8 months ago
-
Hi, I am getting this error compiling a sketch for a wemos D1 mini.
What could be the cause of the problem?
This is the code:
```
IotWebConf iotWebConf(thingName.c_str(), &dnsServ…
-
I have error on compiling for Wemos d1 mini:
/Users/jordes/Library/Arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/2.5.0-4-b40a506/bin/../lib/gcc/xtensa-lx106-elf/4.8.2/../../../../xtensa-lx106…
-
### The problem
Begin January 2023 I uploaded 5 new WEMOS S2 mini boards (Lolin v1) using ESPHome over USB via the "manual" mode. That alml worked fine, as long as I put the board in boot mode (press…