-
#### Hardware
WiFimanager Branch/Release: Development
Esp8266:
Hardware: Wemos D1 Pro
Core Version: 2.4.2
### Description
after upgrading the esp8266 core from 2.4.1 to 2.4.2 b…
-
A new error occured while trying to connect to sinric, my Wemos D1 mini board is repediately giving me the error that:
[WSc] Webservice disconnected from sinric.com!
-
### The problem
failed to execute 'open' on 'serialport': failed to open serial port. getting this on my wemos dp1 mini through the esphome webportal. connecting directly to HA and loading it that wa…
-
Code is well written. The server name is missing so
after flashing the Wemos device, I have failed to connect error.
If I had a JSON object to show what kind of data the board is expecting from t…
-
### Expected behavior
Normal behavior of a firmware on ESP32 board.
### Actual behavior
The board apparently does not boot anymore.
### Test code
### NodeMCU startup banner
Last firmware v…
-
I get the same thing. Tried 4 different cables, different USB ports. I cant get passed the initialization.. spi says connection ok. Then i do the init and it hangs there
I edited elechouse ccp and …
-
### The problem
The code below works for months without any prolems until the update to 2021.10.2.
The esp doesn't connect to wifi with the reason "Auth expired". I post the log written by the too…
-
There is some inconsistency in the Lolin S2 Mini plate.
The chip itself may have freely configured pins as i2c, sleep, uart, and the tile itself has no descriptions, only numbers.
Some of the …
bato3 updated
4 months ago
-
Thank you for your project. Now I'm using Wemos D1 Mini32 board (& Tindie Opentherm master shield).
It will be great if your gateway could support Ethernet connection instead of wi-fi. It is more r…
-
As described in "[Flashing the firmware](https://github.com/open-dynamic-robot-initiative/master-board/blob/master/firmware/README.md#flashing-the-firmware)", the esp chip needs the RST and GPIO-0 pin…