-
## The problem
I recently bought an LG smart TV and integrated it in Home Assistant. I put this in a group together with my Ziggo STB. When the STB is on and the TV is off the state is 'on', but …
-
Hi,
I try to monitor my TL1500-20 with your great Perl program.
The HW-version is v1.1
The SW-version is E1.00.
The RS485 communication is working fine but after receiving the serial number of…
-
Hi, I'm doing a DVB-C channelscan, but the channellist misses one channel. When doing a channelscan with TransEdit the LCN is filled in with channelnumber 613 which is correct. How can I get this miss…
ghost updated
4 years ago
-
### The problem
I'm running home assistant 2021.2.3. Before updating to 2021.3.0 - 2021.3.3 I've run the configuration check add-on. It tells me the configuration check did not pass (see attached log…
-
i cannot succeed in connecting to the Sonoff, and need some help
im running the simple-sonoff-server(at putty screen 1)
1.set the sonoff basic into AP mode
2. find and logged into the sonoff (at …
NiekN updated
3 years ago
-
[linuxserverurl]: https://linuxserver.io
[][linuxserverurl]
I …
-
Hello NeonWallet team,
I've used Neon Wallet with my Ledger Nano S, everything was worked well and I've sent all my NEO from Bittrex to Nano S a few days ago. But today, I open NeonWallet but it di…
dlv14 updated
3 years ago
-
After flashing itead-sonoff-th I found out that i have to enable RPN rules. In order to activate this option I sed #define RPN_RULES_SUPPORT to 1.
After flashing with this new setting, the webs…
ghost updated
4 years ago
-
## The problem
I've had the component work properly for a couple of months, until a while back I received a new router because the old one caused problems with the WiFi.
I've tried multiple comb…
-
August 2020 i changed my PV setup. Replaced 1.5-TL(1 mppt) for a 3-TL2 (2 mppt) and added extra panels on an other roof. I used the script from Woutrrr https://github.com/Woutrrr/Omnik-Data-Logger) wi…