-
```
What steps will reproduce the problem?
1.scan all channels both analog and QAM
2.When you have a duplicate channel, set the digital version to the same name
and channel number
3.run the schedules…
-
```
What steps will reproduce the problem?
1. Receiving a 64-bit addressed I/O sample from a Series 1 XBee,
configured with digital channels 0-2 set to digital in, channel 2 set to
analog in, and ch…
-
```
What steps will reproduce the problem?
1. Receiving a 64-bit addressed I/O sample from a Series 1 XBee,
configured with digital channels 0-2 set to digital in, channel 2 set to
analog in, and ch…
-
It's possible that the problem only occurs when analog channels are enabled. It supposedly works fine otherwise. (See ticket #45146)
[test.logicdata.zip](https://github.com/saleae/unio-analyzer/files…
-
I don't know if this should go in here or a different module?
Here's what it spews when you first connect for it (sorry for the wonky formatting), it's also on port 9995 rather than the one the oth…
-
```
What steps will reproduce the problem?
1. Receiving a 64-bit addressed I/O sample from a Series 1 XBee,
configured with digital channels 0-2 set to digital in, channel 2 set to
analog in, and ch…
-
Greetings all! In the configuration file examples, I see the squelch setting in the [Sources] section, but in the explanations of the various settings for the configuration file, I see the squelch in…
-
Intan 16-channel headtsages feature a 32 channel chip, but only channels 9-24 are connected, so we do some internal mappings and offsets when acquiring to map those to channels 1-16. (This is toggled …
-
```
What steps will reproduce the problem?
1. Receiving a 64-bit addressed I/O sample from a Series 1 XBee,
configured with digital channels 0-2 set to digital in, channel 2 set to
analog in, and ch…
-
```
What steps will reproduce the problem?
1. Receiving a 64-bit addressed I/O sample from a Series 1 XBee,
configured with digital channels 0-2 set to digital in, channel 2 set to
analog in, and ch…