-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
Trying to use usbasp as a programmer for certain attinys (I tried with ATTINY828) does not work, as the avrdude.conf supplied by the attiny core needs to be used. Original thread: https://community.p…
-
> #if defined( MEGATINYCORE_SERIES )
> #include
>#endif
>#if defined( \_\_AVR_ATtiny85\_\_ )
> #include
>#endif
I am using PlatformIO. Compiling for environments "attiny85" and "attiny16…
-
Hello,
Thank you for your library.
I have an issue in your library which is not working on ATtiny series AVR chip (I have tested on Attiny85/84)
It is working fine on Atmega328. The problem is …