-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When Running M119 Bltouch z probe is always TRIGGERED plugged into Bltouch port. The probe w…
-
Hi,
with double Z only Z,
double optical/mechanical endstops,
endstops on Z **triggered** after homing,
power off,
restart,
now you can't move any axis over manual menu,
homing on all a…
-
Hi Guys,
I have a problem with the homing X-axis when extruder has a print temperature. I fighting with this quite long time and really I'm fed up.
I made a video to show you the problem: https://yo…
-
I am brand new to this and I purchased a ANET A8 that was DOA. I purchased a mks gen 1.4 board and a mks mini12864 v1.0 & a mks tft32 w/ wifi. (I am not a coder/programmer)
I was able to get the mi…
rnx22 updated
2 years ago
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Tenho uma ENDER 3 V2 NEO, funcionamento perfeito, nunca tive problemas, porém resolvi de atualiz…
-
all three marlin tango revisions seem to be the same 1.1.8 and seem to be setup for a delta.. i'm fairly new to marlin, and i am trying to get my new board running on a cartesian, and currently i am g…
-
### Description
Bed leveling isn't activating at all during prints on the last 1.3.5 firmware. It was working fine on older 1.2.2.
### Steps to Reproduce
1. Do a bed mesh and use I M420 S…
-
Good morning, everyone,
Does BTT check its firmware before offering it, it's incredible there's never a .bin that works properly.
Following the replacement of my Mini E3 (TMC X HS) I wanted to try t…
-
He montado el doble extrusor en mi impresora Tevo Nereus. Tengo conectados los termistores y funcionan bien midiendo la temperatura de los dos extrusores.
Pero el problema lo tengo al conectar los…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I want to use backlash compensation on a dual-X-axis printer. With backlash compensation set …