-
Da ich keine bessere Möglichkeit gefunden habe, Kontakt aufzunehmen, hab ich mal schnell eine Issue aufgemacht.
Meine System: Raspberry Pi 2 mit dem PiCAN 2 Modul. Am CAN Bus hängen zwei UVR1611 un…
Wopfi updated
7 years ago
-
Number component doesn't work properly in HA.
Due to scale up/down feature, number in gui more or less from original number provided by canopen node.
Example:
```
CO Node:
sprinkler:
…
-
### What happened?
We connect to an OPC UA server via a WAN connection where the hostname of the server is not present in our DNS, so we connect to it via IP address. We had no problems connecting…
-
Hi!
I have a brushless motor driver that supports CANopen, and I would like to control it in profile velocity mode. The driver supports only 3 modes
1: Profile Position Mode
3: Profile Velocity …
-
can look like this:
```
"DevicePath": "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:056A:00DB.0007/hidraw/hidraw6",
"Manufacturer": "Wacom Co.,Ltd.",
"ProductName":…
gonX updated
12 months ago
-
First of all thanks for the effort to make this possible :)
Second: I'm not able to open objdictgen.py.
After the command: alessio@alessio-VGN-NS21M-W:~/Documents/Lavoro/UNIBS/CANBUS/CANOPEN/Firmw…
-
Since we reached consensus about choosing the CANFestival way, we can sketch some tasks related to this story:
- [x] Study and investigate [*official* CANFestival forks](https://canfestival.org/c…
-
What about if extensions could register custom quick views? So that can be added previews for things like MathML, fonts, inline svg, css timing functions, ...
Maybe something like this:
``` javascri…
-
Hello,
I am trying to move a Maxon motor through CoE (CANopen over EtherCAT) using the SOEM library.
When the PDOs are set for moving the motor, (the registers for the PDO transmission) sending an…
-
### What happened?
modbus over serial port(com) could not closed successfully, try to call PlcConnection.close() when com disconnect, it will be in an endless loop. the major reason is that it will c…