-
If you suspend by holding the menu button, on resume the External DAC is no longer being fed audio data. Unplugging the DAC or simply power-cycling it doesn't help. Any combination of removing and rep…
-
During the Kernel initialization, USB power is dropped off and back on causing some devices not to reset properly during the boot/reboot. For example some SSD drives may fail totally and HDD drives em…
-
So I'm using a raspberry pi for vision and I'm having an issue with it when the robot is turned on. The pi doesn't seem to connect to the network and is impossible to reach unless I cycle power while …
-
https://github.com/cagnulein/qdomyos-zwift/tree/master/src
The bridge's main focus is control. A lot of devices (https://github.com/cagnulein/qdomyos-zwift/tree/master/src/devices) have various fall-…
-
[There's a report here that says we have a problem with timestamps](https://rsaxvc.net/blog/2024/2/4/ArduPilot_A_Matter_of_Time.html) becoming inaccurate over time.
This was brought up in [this dis…
-
- Model: `gaze17`
- BIOS version: 2022-07-27_00cebe9
- EC version: 2022-07-27_00cebe9
The touch pad will sometime randomly stop responding. The EC toggle Fn+F1 does not bring function back. Power…
-
Hi all,
I'm working with a SONY UDA-1 connected via USB. I've tried power cycling the pi but I'm still getting audio through the stereo headphone jack.
Anything I can do to force USB audio?
T…
-
I am working on a nRF52840 based low power application and I observed excessive power consumption. I narrowed down the issue to the debug port being left active. The issue always occurs after using a …
-
### Link
https://www.amazon.com/dp/B0D63CR311
### Model
TYZGTH16A-D1RF
### Description
Relay switch with build in temperature/(or)humidity sensor
### Vendor
Mumubiz
### Picture (link)
https:/…
-
I would like backtrack intervals to depend on recent movement.
Background: I currently have the backtrack interval permanently set to 30 minutes. This way I record a useful long-term location histo…