-
Why there is a difference?
In case of 'ReturnTemp' additionally '64898' is shown.
`
root@Debian10:~# ebusctl
localhost: info
version: ebusd 3.4.v3.3-51-g57eae05
update check: revisi…
-
My esp-ebus-adapter sometimes becomes unavailable and does not come up again. From other projects I know that the low-level IP stack of esp sometimes can make problems and requires a full reboot to be…
-
In hcmode.inc we have Status command:
```
r,,Status,Status,,,B511,03,,,temp;press;press;HEX:4,,,
```
If I try to check status:
```
root@core:/etc/ebusd/vaillant# ebusctl r -c hc Status
ERR: ele…
-
Hello John,
I connected a DHT11 sensor to my ESP32. The sensor will not be found.
I checkt the signals with the Oszilloskop.
The SW is doing the Pulldown but it is a little bit short. In the sp…
-
Hey there,
we got an new VRC720/2 (CTLV2) - (0020260914) and it looks like not compatible right now.
an symlink to 15.700.csv went wrong. like
```
ebusctl r -f hwcTimer.Saturday
ERR: invalid …
-
When I try to compile and install the module for 5.10.11-v7+ Kernel on my RPi2, I get a crash stacktrace:
```
root@cybrasp-ke:~/ttyebus# make install
cp ttyebus.ko /lib/modules/5.10.11-v7+/kernel…
-
Hi,
I couldn't find license information in this repository. Would you mind adding a license file, similar to how it's done in the [ebusd repo](https://github.com/john30/ebusd)? This would be use…
-
Hello,
I did the exact same thing as "https://github.com/john30/ebusd-configuration/issues/196" with the 720f regulator and even if a lot of things are ok, everything is not working :
The main iss…
-
First of all, since I am new to this Github, a short introduction: I have started using ebusd recently at my new home. My home has an all-electric heat pump system installed, all Vaillant. I am using …
-
Bonjour,
J'ai un souci pour extraire des valeurs de messages de type JSON avec JMQTT:
Ma config: Jeedom 4.1.20, JMQTT 2020-02-18 01:42:45
J'utilise ebusd pour le monitoring et le contrôle de ma…