-
Starting `scan_identifiers.py` with `--check-session 3 `was intended to check the session after every 3rd request.
For service 0x31 the current implementation checks for every third identifier, which…
-
To my reading, sections 3.1.1.1 and 3.1.1.3 seem to offer diverging advice as to how a primary ECU should handle a failure to verify the latest time from an external time source. In 3.1.1.1, it says “…
-
Fingerprint Corolla 2021 non-hybrid Brazil made
dongleId = "1e9d51d3eb083940"
route: 1e9d51d3eb083940|2021-04-07--10-13-24
https://github.com/commaai/openpilot/pull/20070
carFw = [
( ec…
-
See https://docs.google.com/spreadsheets/d/1eT2R8hmsD1hC__9LtnkZ3eDjLcdib9JR-3Myc97jy8M/edit#gid=587742707
-
I have a ME7.1 ECU from a 2000 A6 that I've been having trouble getting into boot mode, so I was excited to see you've been working on this tool. Really appreciate you making it open source!
> Vers…
-
Hi!
Clone equipment based on ESP32S CP2102 TYPE-S
Everything works fine with Simontools.
Tiguan MQB 2.0 gen3 CHHB unit 5N0906259 / ECU HWN 06K907425B
VW_Flash can't work.
What could be the probl…
-
**Describe the bug**
A lot fo units are having issues where they show up in device manager but TunerStudio connects/disconnects at random, and console is slow to connect/sometimes fails. Is there som…
-
i plug in USB while ignition key is OFF
this turns ECU on and I hear some relay engaging, that's UNEXPECTED
could be HW or SW issue
-
I can't configure it successfully, does it require a token from the EMA App for example to complete the config? Pls see attached log file for details.
[homebridge-apsystem-inverter.log.txt](https://g…
-
### Describe the bug
Describe the bug
Is support available for “Hyundai Genesis GV70 2021”?
At comma 3x, the vehicle is not recognized and starts in dashcam mode.
So I tried extracting my car's fi…