-
Hi! I'm using enc28j60 with arduino nano. (strange, but on module written "mni ecn28j60"). I am running this code:
```C
#include
static byte mymac[] = { 0x74, 0x69, 0x69, 0x2D, 0x30, 0x31 };
…
-
-
I am sorry for probable dumb question - I am quite new to Arduino world. How do I use the library with Ethernet shield? Any help appreciated! Thank you!
-
Hi,
is there a way to change the WiFi Channel of the repeater. I run it in automesh mode
-
Requires an IP stack and ethernet controller.
Apparently @naggie has an all in one thing I can have.
NTP protocol is fairly simple. Both client and server implementations would be useful.
Similar p…
-
As suggested on MCH2022, you may want to look into the TCP/IP for 8/16 bit microcontrollers, really small and pretty feature complete. There is now an IPv6 version too.
https://en.wikipedia.org/wi…
-
```
What steps will reproduce the problem?
1. configure device001/2 with ATmega128; 16MHz; Large
The following output will be displayed
Calculate code size: device_001.sizeelf
avr-gcc -mmcu=atmega1…
-
```
What steps will reproduce the problem?
1. configure device001/2 with ATmega128; 16MHz; Large
The following output will be displayed
Calculate code size: device_001.sizeelf
avr-gcc -mmcu=atmega1…
-
```
What steps will reproduce the problem?
1. configure device001/2 with ATmega128; 16MHz; Large
The following output will be displayed
Calculate code size: device_001.sizeelf
avr-gcc -mmcu=atmega1…
-
```
What steps will reproduce the problem?
1. configure device001/2 with ATmega128; 16MHz; Large
The following output will be displayed
Calculate code size: device_001.sizeelf
avr-gcc -mmcu=atmega1…