-
### The problem
I am using an 3-phase Enphase Solar system with 16 panels, Production and Consumption CTs plus 2 pcs 3T batteries.
According to the documentation above I should be able to activate /…
-
Looks like something changed, whereas I was getting individual inverter power updates about every 5 minutes, that's now shifted to one update per hour. I use this to track the percent contribution of…
-
### The problem
I am trying to setup an integration with Enphase for our solar. However, I am unable to get it to connect. I have verified the IP address of the gateway by logging into the gateway fr…
-
For those folks who cannot read their solar inverter directly capturing solar generation data is a laborious process prone to error. Basically one has to add all the circuit power in use and subtract…
-
Hi.
With latest 9.0.3 version and HB 1.8.4, after reconfiguring MQTT and REST, a warning appears:
`[homebridge-enphase-envoy] This plugin generated a warning from the characteristic 'Grid profil…
-
### Describe the bug
Als follow up zu #15438 und nachdem dieser Bug nun einen PR hat. Tritt der nächste Fehler beim PMCP auf.
[lp-1 ] ERROR 2024/08/17 15:41:13 charge power: not available
[eebus…
-
### The problem
Enphase Envoy custom polling interval set for 10seconds and triggers every 10seconds but "action update entity" doesn't execute ever 10seconds.
Here is my custom polling automation…
-
Hi
I'm looking to try and get your code to possibly work with my openHAB setup. The MQTT broker I run has user/password authentication. Are you able to add that to you code before I try and run it …
-
I'm not sure if some math is being preformed but when there is another inverter in the system and enphase is only part of the PV production, when I am exporting power back to grid, the consumption is …
-
### The problem
After a power outage, the Enphase Envoy Energy Production Today sensor reports incorrect values of 5,000 kWh-16,000 kWh for a period of time. This causes issues with the energy dashbo…