-
Both of these functions are defined in the Ethernet.h header, but the actual code is nowhere to be found, and I get a linker error
`
Ethernet.setRetransmissionTimeout(150);
Ethernet.setRetra…
-
STR:
- Install Ubuntu Server 24.04 and configure networking
- `$ sudo snap install --edge webthings-gateway`
- `$ snap connect webthings-gateway:system-observe`
- `$ sudo snap connect webthings-ga…
-
### What is the issue?
I’m using the latest Apple TV 4K 3rd gen running tvOS 18.0 with hardwired Ethernet directly to my router and a reliable fiber connection. I’m observing frequent network disconn…
-
### Issue Summary
Inconsistency between ethernet_interfaces and tunnel_interfaces when configuring TCP MSS ceiling segment size.
`ethernet_interfaces` uses the below:
```
etherne…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
We lost connectivity to wrk-88 server.
We would like to rule out low level issues by
- examining and reporting status of the port link lights
- re-seating both twinax cables connecting this server t…
-
https://github.com/openconfig/public/blob/f46ca2cc6a2e5832cb0bd03d30c78b735129063c/release/models/interfaces/openconfig-if-ethernet.yang#L368-L382
Currently, `enable-flow-control` leaf does not spe…
-
Hello,
For my use case, I frequently need to perform a power cycle on the LiDAR or unplug and then replug the Ethernet cable connecting the LiDAR to the PC. However, after doing this, the LiDAR and…
-
Hi, I was searching the repository and didn't find anything similar to this question, so I'm going to ask it.
First, I’m using an Arduino Uno R3 with an Ethernet shield W5100 connected to Johnny-Fi…
-
Currently, you can connect via Ethernet, and serve out the hotspot via WiFi.... i.e. Ethernet => WiFi.
It would be great if you could also do:
WiFi => Ethernet
Ethernet => Ethernet
I especially wa…