-
I am using two K8200 printers, one with the standard nozzle (0.5 mm, drilled to 0.6) and one with a E3D V4 Hotend (0.4 mm). The extruder (gears similar to Wade's) are the same, just different stepper …
-
I have two authentication guards. The filament package is using a special admin one that uses a different table and model than the default users configured in laravel.
First thing i've noticed is tha…
-
I'm running a print with PVA, I didn't know what temp would've been good for it, so I started running it at 200c per the manufacturer recommendation. But that is too hot, I want to lower it to 195, b…
-
### Version
_Version of Slic3r++ 1.43.0
### Operating system type Windows 10-1903
### 3D printer brand / version + firmware version (if known)
Prusa MK3, firmware 3.7.2-2363
### Behavior
A…
-
[Isn't this madness?](https://github.com/macdylan/3dp-configs/blob/main/PrusaSlicer/Snapmaker.ini#L3406), the original A350 was rated at 250c Max, and the start gcode picks the
max of (250 or min(29…
tyeth updated
6 months ago
-
### Description
While printing in the LCD Simulator mode, the print head will randomly pause for about 5 seconds, depositing a blob of filament before continuing on. Also noticed, after aborting an…
-
### Version
master @ 03f17a13e756038603d471c80d22d45012f1059a
### Operating system type + version
Debian Unstable
### 3D printer brand / version + firmware version (if known)
N/A
### Behav…
-
I got some new types of filament yesterday and wanted to try out different print parameters to get the best print results. I added my test part several times and created different filament profiles. I…
-
it looks like you only check the pin status on start up so that if after starting with the default Pin of -1 then changing the Pin to a valid value the plugin is not refreshed.
I was trying to figu…
-
My biggest and only main complaint with Bambu's iteration of Prusaslicer is that they opted to remove using instances and instead clone the parts. This is super obnoxious when making changes to one pa…