-
After I followed these steps
> Load the esp8266Programmer sketch from the flashing folder.
Select Tools - Board - "LilyPad Arduino USB".
Select the Port your device is connected to under Tools -…
-
Deprecate DS30's bootloader and use the standard [USB DFU](http://www.usb.org/developers/docs/devclass_docs/DFU_1.1.pdf) flashing method allowing for potentially better integration with [fwupd](https:…
-
Whilst we don't intend to do a full chip bring-up until the mass production version is released, we would like to get a minimal chip bring-up to aid future developments.
- [x] PAC support
- We…
-
Hi Kenneth,
I have seen cases where we accidentally started flashing the wrong bitstream. We noticed and pressed
Cntl+C. The bad thing was, that trying to flash the right data did not work and the…
-
Hi,
currently OS-specific command-line tools or IDEs are necessary to flash diyBMS on the ESP32.
This makes the use of diyBMS impossible for non IT-savy users.
I suggest flashing the ESP32 via …
renne updated
2 years ago
-
Setup:
Kiss FC V1 (latest firmware)
Steele PDB (latest 2.5 firmware)
FrSky X4r
I keep seeing "no connection to kiss fc" on the bottom of the screen after boot up. No amount of flashing or wiri…
-
Hello!!!
First of all, I bought a bunch of switches because I really like the product. Thank you for this, it changed how notifications happens throughout my house.
From the 5 switches I bought,…
-
Hi @atc1441,
First I'd like to thank you for the impressive work that you've done reverse engineering the flashing protocol and giving us mortals the possibility to flash custom firmware via OTA :)…
-
### Reproducible in vscode.dev or in VS Code Desktop?
- [X] Not reproducible in [vscode.dev](https://vscode.dev) or VS Code Desktop
### Reproducible in the monaco editor playground?
- [ ] Not repro…
-
@NilsBohr Please consider making use of the "Silicon Labs firmware builder" which is a new open-source firmware build system that Home Assistant founders have now among other things announced as a com…
Hedda updated
5 months ago