-
Hello,
Can you please include this by default? This will allow us to connect serial devices to NodeRed without having to SSH into each GX which is not possible for remotely. Mostly a problem when d…
-
See
https://github.com/torvalds/linux/blob/master/drivers/i2c/busses/i2c-tiny-usb.c
Quote:
```
/*
* Initially the usb i2c interface uses a vid/pid pair donated by
* Future Technology De…
-
I run the roslaunch imu.launch, then it works good, despite it shows a warning message periodically "**Something bad when reading**". This warning suggests that some readings of imu are lost.
But the…
-
As discussed in https://github.com/mu-editor/mu/pull/1094#discussion_r485236964:
When two or more of the same device (or two or more different ESP devices with the same FTDI chip) are connected, th…
-
Greetings. I'm attempting to us ADTPro version 2.1.0 on Windows 11. I've tried two different USB Serial devices both unsuccessfully.
Firstly, a "BENFEI USB to Serial Adapter, USB to RS-232 Male (…
-
This definitely worked a few months ago, but I've changed laptops since then and now it doesn't:
```
$ openFPGALoader -b tangnano9k --verbose-level=2 build/counter.fs
empty
Jtag frequency : requ…
-
Using Hardware or Software Handshaking on an external USB-Serial (FTDI) device:
When the receiving devices holds it's RTS low, the StoreAsync() should time out based on the .WriteTimeout parameter …
-
Greetings,
Apologies in advance for a newbie question. Does this work for all FT devices?
I tried commands such as the following with a couple of FTDI devices:
```
sudo ./ftx_prog --old-vid 0…
-
Using the FT232RQ chip, when the usb device is plugged into tablet I receive both "USB Ready" followed by "USB device not supported".
Both serial read and write do not function.
-
When connecting FT232R (tried cloned analogs and original ones), it receives garbage on read buffer:
```
2020-06-30 13:32:42.077 30128-30177/? I/UsbSerialDebugger: Raw data from Read buffer: 0x01 0x…