-
Hello there... Not sure this is wanted, but I'm starting the work to update the SofleRGB to use `SK6812-MINI-E` which seems to be considerably easier to solder vs the regular `SK6812-MINI`.
I have …
-
Hello.
Given the shortage of flash memory now present, i wanted to know how much it might be of interest if I try to make an updated version of the board using a STM32F405RG instead of the STM32F103C…
-
The PCB wasn't updated when the pull-up resistors were changed from 4k7 to 10k, and from 470 to 4k7 (see commit a848aa25b4dfe19334df68c5f3d26fe0f7ec0768). The current PCB still has the 4k7 / 470 Ohm v…
-
Ordering is not accessible. The current process requires software download of over a gigabyte, install many gigabytes and translate instructions for old KiCAD version to current version.
Despite so…
-
Regulator : KIA1117-3.3
SD card holder
Crystal?
Couple led (power, activity)
Power Jack? Or USB?
-
Hi!
I would absolutely love to use this plugin to help my KiCAD workflow along a little, and I've heard interest from multiple other people.
However, I am immediately faced with an issue that see…
-
I've attempted to conver the OpenVizsla 3.2 Altium design from https://github.com/openvizsla/ov_ftdi/tree/master/hardware but I get the following error message:
`
ERROR: Wrong recordtype: 0600, ex…
-
I have no idea what I'm supposed to do here, even with the guidance that I should look at the ebaz folder.
-
Hi,
I'm working mainly with KiCad and I have written some tools by myself.
See https://github.com/KarlZeilhofer/kicad2csvbom and https://github.com/KarlZeilhofer/KiCadSheetRearranger
I'm ver…
-
Hi Jeff,
I spent over an hour trying to get this to run on OSX.
I assume that the wxWidgets version will be easier to use, but if thats not ready a quick howto on getting it up and running on OSX wou…