-
much like docker build shows you how long each step took, add a small and nice looking latency notice
maybe model it after zsh/Powerlevel10k like this if we wanna be fancy:
![image](https://gith…
-
```
A lot of the board-level targets (lilypad, PRO series) seem to have been
defined in the early days of those boards' development, when they were still
using ATmega168 CPUs. Most of the current v…
-
```
The makefile for the Arduino Pro 8MHz board specifies 115200bps for the upload
speed, but in fact this bit rate is unlikely to work. (8+% error and a very
tiny divisor.)
tests have shown that …
-
Some boards do not have vid and pid at board.txt. For example:
```
##############################################################
nano.name=Arduino Nano
nano.upload.tool=avrdude
nano.upload…
-
**Is your feature request related to a problem? Please describe.**
A better solution suggested by @ZeroMemes for #1323.
**Describe the solution you'd like**
A module that hides all the seeded psu…
-
```
Since x360 analogs ain't square there's a problem if the game wants the corners
to be reached.
I've added the Pokopom method using radius to extend only on the edges so as to
not loose stick mo…
-
```
The makefile for the Arduino Pro 8MHz board specifies 115200bps for the upload
speed, but in fact this bit rate is unlikely to work. (8+% error and a very
tiny divisor.)
tests have shown that …
-
```
The makefile for the Arduino Pro 8MHz board specifies 115200bps for the upload
speed, but in fact this bit rate is unlikely to work. (8+% error and a very
tiny divisor.)
tests have shown that …
-
```
The makefile for the Arduino Pro 8MHz board specifies 115200bps for the upload
speed, but in fact this bit rate is unlikely to work. (8+% error and a very
tiny divisor.)
tests have shown that …
-
```
The makefile for the Arduino Pro 8MHz board specifies 115200bps for the upload
speed, but in fact this bit rate is unlikely to work. (8+% error and a very
tiny divisor.)
tests have shown that …