-
Hi,
i have this Beckhoff EL6751 CANopen Master/Slave communication channel.
I was hoping to connect CANopen VFD to it and somehow control VFD using LinuxCNC.
But I don't know how to configure it.
…
-
The debian build tool lintian discovered several typos in the source debian package. Here is a script to fix the detected issues. I do not see the point of only running it on the source repository, …
-
Dears
When I run linuxcnc with my config, there is an error appears as following
LINUXCNC - 2.8.0
Machine configuration directory is '/home/tsinglin/linuxcnc/configs/sim.Test_axis_HC_Sample-2'…
ibXCM updated
4 years ago
-
I've been working on my GUI in my spare time and thought I would give an update on it. It is to the point where it has just about all of the major components I wanted implemented. It is nothing specia…
-
Branche 2.9 RIP Installation
I experimented with warning Python WaitCommandComplete timed out
https://forum.linuxcnc.org/38-general-linuxcnc-questions/52141-warning-python-waitcommandcomplete-tim…
zz912 updated
2 months ago
-
Setting up LinuxCNC with EtherCAT is difficult. We need better documentation, ideally including a basic sample config for a simple 3-axis CNC.
-
Hi
I'm probably wrong but i see nothing in documentation about this TRAJ config
https://github.com/LinuxCNC/linuxcnc/search?q=NO_PROBE_JOG_ERROR
https://github.com/LinuxCNC/linuxcnc/search?q=NO…
-
I am a bit stuck here. Finally tried to get homemod working.
If I use the basic_cia402 driver, I am unable to set
```
```
6 amps into a 2 amp motor may not be wise.
If I use …
-
http://linuxcnc.org/docs/html/gcode/g-code.html#gcode:g41-g42
-
Run actions/checkout@v3
Syncing repository: zarfld/LinuxCnc_PokeysLibComp
Getting Git version info
Temporarily overriding HOME='/home/runner/work/_temp/47f26848-ecfd-4eeb-bd13-592cc8be0ee6' before …