-
Not relevant any more ~~I have uplugged extruder cable, which contains the following wiring:~~
- ~~extruder stepper;~~
- ~~extruder heater;~~
- ~~extruder fan;~~
- ~~extruder thermistor;~~
- ~~part fa…
-
Log when I click a stream, MLB or NHL, shows streaming URL empty.
```
2021-06-03 16:45:30 [xTeVe] Streaming Status: Channel: Lazystream: MLB 1 - No client is using this channel anymore. Str…
-
I am using a BLTouch probe for bed leveling with RC4. This is treated like a servo for deploying the probing pin. I am having random issues where the pin seems to get pushed back out before the the …
-
I was using the old 1.0 firmware and just uncommented `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` and changed the pins of the u8g lcd and it worked, now i uncomment and change but it get stuck in …
-
1 all versions:
if you enter the menu -MOVE AXIS -and set the movement (1 mm) let 100mm , displacement will be larger (say 120 mm). When working with Repetier-Host the movement of the target value
-t…
-
I started my first dual print with the RCBugFix of two days ago.
I realized that the second extruder had problems when doing a tool change.
I have a tool change script which purges the previous and pr…
-
Since i upgraded from RCBugFix to 1.1.3 bugFix i experience random layer shifts on every print.
![img_20170609_184609](https://user-images.githubusercontent.com/20832276/26986638-a9d935d2-4d48-11e7-8…
-
Klipper ignores Z-acceleration limit under some circumstances and jumpes directly to maximum specified speed. This causes my Z-Axis stepper to skip and loose steps. However I found a workaround, which…
ghost updated
2 years ago
-
Please remove all sections not relevant to this issue (including this statement).
## Bug report
Please do not report the "Works fine on the first (or first and second corner), display says 'ok. …
lnevo updated
2 years ago
-
Miami Marlins vs Philadelphia Phillies played two games but the event id is the same
Market factory: "0x4225c4fe9a02706c7bec927a3db25f29e273b3d1"
market indexes: "493", "375"
these events shoul…